Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › SFI SYSTEM › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002967 K3-VE ENGINE CONTROL _0014971 SFI SYSTEM L

K3-VE ENGINE CONTROL  SFI SYSTEM  PRECAUTION  


INITIALIZATION


NOTICE:

Perform RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, transmission valve body assembly, engine assembly or ECM (See page Drivetrain>A4Q AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION SYSTEM>INITIALIZATION).


HINT:

Initialization cannot be completed by only removing the battery.



FOR USING INTELLIGENT TESTER


CAUTION:

Observe the following items for safety reasons:

·

Read its instruction books before using the tester.

·

Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.

·

When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.