Home › Engine / Hybrid System › 3SZ-VE ENGINE CONTROL › THROTTLE BODY › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002968 3SZ-VE ENGINE CONTROL _0014974 THROTTLE BODY A

3SZ-VE ENGINE CONTROL  THROTTLE BODY  REASSEMBLY  


PROCEDURE

Hide 89690 1.INSTALL IDLE SPEED CONTROL VALVE

a.
A126593C01
2.24,1.438 2.24,1.719 false 2.177,1.76 2.646,2.177 0.469,0.417 10 *1
*1 O-Ring


Install a new O-ring onto the idle speed control valve.


b.
A133508

Install the idle speed control valve with the 2 screws.

Torque:
1.8 N*m (18 kgf*cm, 16 in.*lbf)


Hide 89452G 2.INSTALL THROTTLE POSITION SENSOR

A126591

a.

Install the throttle position sensor with the 2 screws.

Torque:
1.8 N*m (18 kgf*cm, 16 in.*lbf)


Hide 17771A 3.INSTALL AIR CLEANER BRACKET

A133506

a.

Install the air cleaner bracket with the 2 bolts.

Torque:
7.5 N*m (77 kgf*cm, 66 in.*lbf)