Home › Engine / Hybrid System › 3SZ-VE ENGINE CONTROL › KNOCK SENSOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002968 3SZ-VE ENGINE CONTROL _0014981 KNOCK SENSOR G

3SZ-VE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A093606C01
1,0.156 1.531,0.583 0.531,0.427 10 *a
*a Component without harness connected
(Knock Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.