Home › Engine / Hybrid System › 3SZ-VE ENGINE CONTROL › HEATED OXYGEN SENSOR(w/o Rear Heated Oxygen Sensor) › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002968 3SZ-VE ENGINE CONTROL _0014983 HEATED OXYGEN SENSOR(w/o Rear Heated Oxygen Sensor) G

3SZ-VE ENGINE CONTROL  HEATED OXYGEN SENSOR(w/o Rear Heated Oxygen Sensor)  INSPECTION  


PROCEDURE

Hide 89465 1.INSPECT HEATED OXYGEN SENSOR

a.
A119369C06
1.542,1.125 0.958,0.927 true 1.958,1.125 2.5,0.938 true 1.521,1.604 0.927,1.792 true 2.563,0.854 3.198,1.333 0.635,0.479 10 HTR- 0.49,0.844 1.115,1.271 0.625,0.427 10 HTR+ 0.76,1.74 1.125,2.156 0.365,0.417 10 E 0.115,0.104 0.573,0.552 0.458,0.448 10 *a
*a Component without harness connected
(Heated Oxygen Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HTR-) - 2 (HTR+) 20°C (68°F) 11.7 to 15.5 Ω
1 (HTR-) - 4 (E) Always 10 kΩ or higher


If the result is not as specified, replace the sensor.