INITIALIZATION
Perform RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, transmission valve body assembly, engine assembly or ECM (See page Drivetrain>A4Q AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION SYSTEM>INITIALIZATION).
Initialization cannot be completed by only removing the battery.
FOR USING INTELLIGENT TESTER
Observe the following items for safety reasons:
Read its instruction books before using the tester.
Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.
FOR USING TECHSTREAM
Observe the following items for safety reasons:
Before using the Techstream, read the instruction manual.
Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
When driving the vehicle for testing purposes using the Techstream, two persons are required. One is for driving the vehicle, and the other operates the Techstream.