Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › CYLINDER BLOCK › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002970 K3-VE ENGINE MECHANICAL _0015012 CYLINDER BLOCK A

K3-VE ENGINE MECHANICAL  CYLINDER BLOCK  REPLACEMENT  


PROCEDURE

Hide 1.REPLACE RING PIN

NOTICE:

It is not necessary to remove the ring pins unless they are being replaced.


a.

Remove the ring pins.


b.

Using a plastic-faced hammer, tap in new ring pins.

Standard protrusion:

7.0 to 8.0 mm (0.276 to 0.315 in.)


A262839C03
5.156,0.917 5.49,1.229 0.333,0.313 10 A 6.063,1.188 6.427,1.49 0.365,0.302 10 *a 5.385,1.813 5.802,2.156 0.417,0.344 10 *b
*a Height *b Width


Specification:
Area Protrusion Height Digmeter
A 7.0 to 8.0 mm (0.2756 to 0.3150 in.) 12 mm (0.4724 in.)



Hide 2.REPLACE STRAIGHT PIN

NOTICE:

It is not necessary to remove the straight pins unless they are being replaced.


a.

Remove the straight pins.


b.

Using a plastic-faced hammer, tap in new straight pins.

Standard protrusion:
Pin A:

3.5 to 4.5 mm (0.138 to 0.177 in.)

Pin B:

8.5 to 9.5 mm (0.335 to 0.374 in.)

Pin C:

5.5 to 6.5 mm (0.217 to 0.256 in.)


A276012C01
2.51,1.26 2.781,1.51 2.781,1.51 2.229,1.635 true 2.24,4.125 2,4.385 2,4.385 1.521,4.125 true 1.615,3.115 1.083,3 true 2.844,4.25 3.302,4.135 true 2.844,1.427 3.24,1.76 0.396,0.333 10 A 4.531,0.771 4.875,1.094 0.344,0.323 10 A 0.938,2.896 1.25,3.198 0.313,0.302 10 B 4.531,2.448 4.865,2.792 0.333,0.344 10 B 1.948,4.417 2.292,4.781 0.344,0.365 10 C 4.531,3.5 4.844,3.813 0.313,0.313 10 C 4.719,4.344 5.073,4.729 0.354,0.385 10 *b 5.354,3.688 5.74,4.042 0.385,0.354 10 *a 4.719,3.302 5.083,3.698 0.365,0.396 10 *b 5.333,2.656 5.656,3.021 0.323,0.365 10 *a 4.708,1.604 5.042,1.958 0.333,0.354 10 *b 5.333,0.958 5.667,1.313 0.333,0.354 10 *a 3.354,4.031 3.698,4.385 0.344,0.354 10 B
*a Height *b Width


Specification:
Area Protrusion Height Digmeter
A 3.5 to 4.5 mm (0.1378 to 0.1772 in.) 6.0 mm (0.2362 in.)
B 8.0 to 9.0 mm (0.3150 to 0.3543 in.) 10.0 mm (0.3937 in.)
C 5.5 to 6.5 mm (0.2165 to 0.2559 in.) 6.0 mm (0.2362 in.)