83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
2.REMOVE NO. 2 FUEL SUCTION SUPPORT
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, separate the 3 claw fittings. Then remove the fuel suction support.
Do not damage the fuel suction support and fuel housing.
3.REMOVE FUEL PUMP CUSHION RUBBER
Remove the fuel pump cushion rubber.
4.REMOVE FUEL PUMP AND FUEL FILTER ASSEMBLY
Disconnect the connector from the fuel pump.
Remove the fuel pump with filter from the fuel tube.
Remove the fuel grommet and fuel pump spacer from the fuel pump.
5.REMOVE FUEL PUMP FILTER
| *1 | Clip |
Using a screwdriver, disengage the clip. Then remove the fuel pump filter from the fuel pump.