1.INSTALL FUEL PUMP FILTER
Install the fuel pump filter onto the fuel pump with a new clip.
2.INSTALL FUEL PUMP AND FUEL FILTER ASSEMBLY
Install the fuel pump spacer onto the fuel pump.
Apply a light coat of gasoline to a new fuel grommet, and install it onto the fuel pump.
Apply another light coat of gasoline to the fuel grommet, and install the fuel pump with filter onto the fuel tube.
Connect the connector to the fuel pump.
3.INSTALL FUEL PUMP CUSHION RUBBER
Install the fuel pump cushion rubber.
4.INSTALL NO. 2 FUEL SUCTION SUPPORT
Engage the 3 claws and install the fuel suction support.
83320
5.INSTALL FUEL SENDER GAUGE ASSEMBLY