Home › Engine / Hybrid System › K3-VE FUEL › FUEL PUMP › 2011.11–2014.04
RM19Y0E _51 Engine / Hybrid System _002972 K3-VE FUEL _0015022 FUEL PUMP A

K3-VE FUEL  FUEL PUMP  DISASSEMBLY  


PROCEDURE

Hide 2.REMOVE NO. 2 FUEL SUCTION SUPPORT

a.
A143977
2.167,0.26 1.719,0.698 true 2.146,0.104 2.344,0.281 0.198,0.177 10 *1
*1 Protective Tape


Using a screwdriver with its tip wrapped in protective tape, separate the 3 claw fittings. Then remove the fuel suction support.

NOTICE:

Do not damage the fuel suction support and fuel housing.



Hide 3.REMOVE FUEL PUMP CUSHION RUBBER

a.
A142218

Remove the fuel pump cushion rubber.


Hide 4.REMOVE FUEL PUMP AND FUEL FILTER ASSEMBLY

a.
A265518

Disconnect the connector from the fuel pump.


b.

Remove the fuel pump with filter from the fuel tube.


c.

Remove the fuel grommet and fuel pump spacer from the fuel pump.


Hide 5.REMOVE FUEL PUMP FILTER

a.
A142220
2.052,0.927 2.479,0.688 true 2.51,0.594 2.698,0.76 0.188,0.167 10 *1
*1 Clip


Using a screwdriver, disengage the clip. Then remove the fuel pump filter from the fuel pump.