Home › Engine / Hybrid System › K3-VE EMISSION CONTROL › CANISTER › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002974 K3-VE EMISSION CONTROL _0015030 CANISTER A

K3-VE EMISSION CONTROL  CANISTER  REMOVAL  


PROCEDURE

Hide 77740 1.REMOVE CHARCOAL CANISTER ASSEMBLY

A268980C04
1.51,0.677 1.25,0.469 true 1.865,1.083 2.604,1.51 true 1.302,1.208 0.542,0.792 true 2.646,1.448 2.896,1.625 0.25,0.177 10 *1 1.156,0.281 1.375,0.448 0.219,0.167 10 *2 0.354,0.646 0.573,0.813 0.219,0.167 10 *3
*1 Charcoal Canister Hose
*2 Evapo Hose
*3 No. 2 Charcoal Canister Outlet Hose


a.

Disconnect the charcoal canister hose and No. 2 charcoal canister outlet hose to the charcoal canister assembly.


b.

Loosen the hose clamp, then disconnect the evapo hose to the charcoal canister assembly.


c.

Remove the charcoal canister assembly from the vehicle by pulling it up.