Although the part name refers to the ventilation valve sub-assembly, this procedure is for the PCV valve.
12204
1.INSPECT VENTILATION VALVE SUB-ASSEMBLY
Install a clean hose to the ventilation valve sub-assembly.
Check the ventilation valve sub-assembly operation.
| *1 | Clean Hose |
|
Cylinder Head Cover Side |
|
Air |
Blow air into the cylinder head cover side, and check that air passes through easily.
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the ventilation valve sub-assembly.
| *1 | Clean Hose |
|
Intake Manifold Side |
|
Air |
Blow air into the intake air manifold side, and check that air passes through with difficulty.
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the ventilation valve sub-assembly.
Remove the clean hose from the ventilation valve sub-assembly.