Home › Engine / Hybrid System › 3SZ-VE INTAKE / EXHAUST › EXHAUST PIPE › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002975 3SZ-VE INTAKE / EXHAUST _0015035 EXHAUST PIPE A

3SZ-VE INTAKE / EXHAUST  EXHAUST PIPE  INSTALLATION  


PROCEDURE

Hide 17430 1.INSTALL EXHAUST TAIL PIPE ASSEMBLY

a.

Install the exhaust tail pipe assembly with the 3 exhaust pipe supports.


Hide 17410 2.INSTALL FRONT EXHAUST PIPE ASSEMBLY

a.
A104634

Check the free length.

i.

Using a vernier caliper, measure the free length of the exhaust pipe spring.

Minimum length:

38.5 mm (1.516 in.)


If the free length is less than the minimum, replace the exhaust pipe spring.



b.
A247549C07
0.323,0.375 0.552,0.625 false 0.521,0.896 0.323,1.104 false 2.115,1.229 1.958,0.948 true 0.146,0.281 0.604,0.604 0.458,0.323 10 *1 0.146,1.083 0.573,1.344 0.427,0.26 10 *2 2.083,1.229 2.427,1.5 0.344,0.271 10 *3 2.771,1.323 3.031,1.552 0.26,0.229 10 *a
*1 Exhaust Manifold
*2 Front Exhaust Pipe Assembly
*3 Gasket
*a Space between flanges:7.0mm(0.276in.)


Install a new center exhaust pipe gasket onto the exhaust manifold as illustrated.

NOTICE:
·

Install the gasket in the correct direction.

·

Do not damage the sliding surface of the gasket.

·

Do not reuse the removed gasket.

·

Never push in the gasket with the exhaust pipe when connecting it.




c.

Install a new exhaust pipe gasket onto the front exhaust pipe assembly .


d.

Install the front exhaust pipe assembly onto the exhaust pipe support.


e.

Install the front exhaust pipe assembly onto the exhaust manifold with the 2 bolts and 2 exhaust pipe springs.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


f.

Install the front exhaust pipe assembly onto the exhaust tail pipe assembly with the 2 bolts and 2 nuts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 3.INSPECT FOR EXHAUST GAS LEAK