Home › Engine / Hybrid System › K3-VE COOLING › COOLING FAN MOTOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002977 K3-VE COOLING _0015049 COOLING FAN MOTOR G

K3-VE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.INSPECT COOLING FAN MOTOR

a.
A186191C04
2.365,0.979 1.917,1.573 true 1.135,0.99 1.573,1.573 true 0.156,0.094 0.667,0.521 0.51,0.427 10 *a 0.896,0.771 1.427,1.146 0.531,0.375 10 (+) 2.385,0.76 2.865,1.094 0.479,0.333 10 (-)
*a Component without harness connected
(Cooling Fan Motor)


Check that the motor operates smoothly when battery voltage is applied to the cooling fan motor connector.


b.

Connect the 400 A probe of an ammeter to terminal 2 (+) of the cooling fan motor.


c.

Measure the current while the motor is operating.

Standard Current:
Tester Connection Condition Specified Condition
1 (-) - 2 (+) 20°C (68°F) 6.4 to 9.4 A (80W Fan Motor)
1 (-) - 2 (+) 20°C (68°F) 10.0 to 15.0 A (160W Fan Motor)


If the result is not as specified, replace the cooling fan motor.