Home › Engine / Hybrid System › 3SZ-VE COOLING › RELAY › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002978 3SZ-VE COOLING _0015057 RELAY G

3SZ-VE COOLING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85925 1.INSPECT RADIATOR FAN RELAY

a.

Check the resistance.

i.
E209082

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied 10 kΩ or higher
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.