Home › Engine / Hybrid System › 3SZ-VE LUBRICATION › OIL PUMP › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002979 3SZ-VE LUBRICATION _0015060 OIL PUMP G

3SZ-VE LUBRICATION  OIL PUMP  INSPECTION  


PROCEDURE

Hide 15100 1.INSPECT OIL PUMP ASSEMBLY

A143185

a.

Check that the oil pump assembly body and sprocket are not worn or damaged and that they turn smoothly.


Hide 2.INSPECT ROTOR TIP CLEARANCE

A143186

a.

Using a feeler gauge, measure the clearance between the drive gear and rotor tips.

Standard tip clearance:

0.06 to 0.16 mm (0.0024 to 0.0063 in.)


Maximum tip clearance:

0.16 mm (0.0063 in.)


If the tip clearance is greater than the maximum, replace the oil pump assembly.


Hide 3.INSPECT ROTOR BODY CLEARANCE

A143187

a.

Using a feeler gauge, measure the clearance between the rotor and body.

Standard body clearance:

0.145 to 0.265 mm (0.0057 to 0.0104 in.)


Maximum body clearance:

0.265 mm (0.0104 in.)


If the result is greater than the maximum, replace the oil pump.


Hide 4.INSPECT ROTOR SIDE CLEARANCE

A143188

a.

Using a feeler gauge and precision straight edge, measure the side clearance between the body and rotor.

Standard side clearance:

0.03 to 0.08 mm (0.0012 to 0.0032 in.)


Maximum side clearance:

0.08 mm (0.0031 in.)


If the result is greater than the maximum, replace the oil pump.