Home › Engine / Hybrid System › 3SZ-VE LUBRICATION › OIL PRESSURE SWITCH › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002979 3SZ-VE LUBRICATION _0015061 OIL PRESSURE SWITCH A

3SZ-VE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A143107C01
1.969,0.417 2.344,0.677 false 1.781,0.333 2.302,0.729 0.521,0.396 10 *1
*1 Adhesive


Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



b.
A260570C01
0.469,0.906 1.188,0.906 true 0.281,0.833 0.823,1.24 0.542,0.406 10 *1
*1 24 mm Deep Socket Wrench


Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the oil pressure switch connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK