Use the same procedure for both the RHD and LHD sides.
The procedure described below is for the LHD side.
84450
1.INSTALL IGNITION OR STARTER SWITCH ASSEMBLY (for Automatic Transmission)
Install the 2 screws and the ignition switch.
Connect the 2 connectors.
84450
2.INSTALL IGNITION OR STARTER SWITCH ASSEMBLY (for Manual Transmission)
Install the 2 screws and the ignition switch.
Connect the connectors.
45287
3.INSTALL STEERING COLUMN COVER LOWER
Install the steering column cover lower with the 3 screws.