Home › Engine / Hybrid System › K3-VE STARTING › IGNITION SWITCH › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002982 K3-VE STARTING _0015074 IGNITION SWITCH A

K3-VE STARTING  IGNITION SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RHD and LHD sides.

·

The procedure described below is for the LHD side.



PROCEDURE

Hide 45287 1.REMOVE STEERING COLUMN COVER LOWER

A261459

a.

Remove the 3 screws and the steering column cover lower.


Hide 84450 2.REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (for Automatic Transmission)

a.

Disconnect the 2 connectors.


b.
A263063

Remove the 2 screws and the ignition or starter switch assembly.


Hide 84450 3.REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (for Manual Transmission)

a.

Disconnect the connectors.


b.
A263062

Remove the 2 screws and the ignition or starter switch assembly.