Home › Drivetrain › A4Q AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002983 A4Q AUTOMATIC TRANSMISSION / TRANSAXLE _0015081 PARK / NEUTRAL POSITION SWITCH N

A4Q AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 84540 1.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C153889C04
2.115,0.427 2.75,0.26 true 1.938,1.104 2.854,1.188 true 2.771,0.156 3.281,0.542 0.51,0.385 10 *1 2.875,1.104 3.344,1.521 0.469,0.417 10 *a
*1 Notch
*a Neutral Basic Line


Loosen the bolt of the park/neutral position switch assembly and move the shift lever to the N.


b.

Place a ruler tightly against the notch on the control shaft, and adjust the park/neutral position switch assembly until the neutral basic line becomes parallel with the ruler.


c.

Hold the switch in position and tighten the bolt.

Torque:
18 N*m (185 kgf*cm, 13 ft.*lbf)