Home › Drivetrain › A4Q AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002983 A4Q AUTOMATIC TRANSMISSION / TRANSAXLE _0015081 PARK / NEUTRAL POSITION SWITCH G

A4Q AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C153888C02
1.375,0.99 1.031,0.823 true 2.031,1 2.385,0.781 true 1.594,0.969 1.24,0.563 true 1.823,0.99 2.25,0.5 true 2.063,1.281 2.458,1.448 true 1.385,1.292 1.01,1.51 true 1.833,1.292 2.115,1.729 true 1.635,1.302 1.219,1.729 true 0.146,0.094 0.656,0.542 0.51,0.448 10 *a 1.094,0.458 1.583,0.917 0.49,0.458 10 D 0.896,0.688 1.365,1.115 0.469,0.427 10 P 0.865,1.469 1.313,1.875 0.448,0.406 10 L 1.104,1.719 1.594,2.104 0.49,0.385 10 + 2.531,1.396 3,1.781 0.469,0.385 10 N 2.146,1.75 2.625,2.146 0.479,0.396 10 E 2.281,0.375 2.719,0.698 0.438,0.323 10 2 2.469,0.667 2.823,1.042 0.354,0.375 10 -
*a Component without harness connected
(Park/neutral Position Switch Assembly)


Measure the resistance of the PNP switch when the shift lever is moved to each position.

Standard resistance:
Tester Connection Shift Position Specified Condition
4 (P) - 6 (E) P Below 1 Ω
Except P 10 kΩ or higher
1 (-) - 7 (+) R Below 1 Ω
Except R 10 kΩ or higher
5 (N) - 6 (E) N Below 1 Ω
Except N 10 kΩ or higher
3 (D) - 6 (E) D Below 1 Ω
Except D 10 kΩ or higher
2 (2) - 6 (E) 2 Below 1 Ω
Except 2 10 kΩ or higher
6 (E) - 8 (L) L Below 1 Ω
Except L 10 kΩ or higher


If the result is not as specified, replace the park/neutral position switch assembly.