Home › Drivetrain › A4Q AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002983 A4Q AUTOMATIC TRANSMISSION / TRANSAXLE _0015081 PARK / NEUTRAL POSITION SWITCH G

A4Q AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Apply the parking brake and turn the ignition switch ON.


b.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in other positions.


c.

Check that the back-up light illuminates and the reverse warning buzzer sounds when the shift lever is in R, but not in other positions.

If a failure is found, check the park/neutral position switch assembly for continuity.