Home › Drivetrain › A4Q AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002983 A4Q AUTOMATIC TRANSMISSION / TRANSAXLE _0015083 TRANSMISSION CONTROL CABLE A

A4Q AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 33820B 1.SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C155554

Remove the 2 clips, and disconnect the transmission control cable assembly.

NOTICE:

Do not excessively bend the flexible sections at the ends of the transmission control cable assembly.



Hide 33820B 2.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C246083

Release the transmission control cable assembly from the cable clamp.


b.
C267371

Remove the bolt and disconnect the transmission control cable assembly.

NOTICE:

Do not excessively bend the flexible sections at the ends of the transmission control cable assembly.



c.
C153886

Remove the clip and disconnect the transmission control cable assembly.

NOTICE:

Do not carry the transmission control cable assembly by the flexible sections.