Home › Drivetrain › A4Q AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION FLUID › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002983 A4Q AUTOMATIC TRANSMISSION / TRANSAXLE _0015090 AUTOMATIC TRANSMISSION FLUID G

A4Q AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION FLUID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL

HINT:

Drive the vehicle so that the engine and transmission are at normal operating temperature.


Fluid temperature:

70 to 90°C (158 to 194°F)


a.
C153874C02
1.646,0.479 2.208,1.031 0.563,0.552 10 *b 1.167,0.198 1.656,0.688 0.49,0.49 10 *a
*a OK If Hot
*b Add If Hot


Park the vehicle on a level surface and set the parking brake.


b.

With the engine idling and the brake pedal depressed, move the shift lever from P to L, and then return the shift lever to P.


c.

Take out the dipstick and wipe it clean.


d.

Put it back all the way.


e.

Take it out again and check that the fluid level is within the HOT range.

If there are leaks, it is necessary to repair or replace O-rings, FIPGs, oil seals, plugs and/or other parts.