Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER(for 3SZ-VE) › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0015094 CLUTCH RELEASE CYLINDER(for 3SZ-VE) A

CLUTCH  CLUTCH RELEASE CYLINDER(for 3SZ-VE)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Provisionally tighten the release cylinder bleeder plug.


Hide 04313 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install the release cylinder bleeder plug cap onto the release cylinder bleeder plug.


b.

Install 2 new cylinder piston cups onto the piston.


c.

Install the spring onto the cylinder body.


d.
CL00672

Apply lithium soap base glycol grease to the portions shown in the illustration.


e.

Install the piston onto the cylinder body.

NOTICE:

Do not damage the inside of the cylinder body.



f.

Install the push rod into the cylinder body.


g.

Install the boot onto the cylinder body.