31340
1.REMOVE CLUTCH RELEASE CABLE ASSEMBLY
Disconnect the end of the clutch release cable assembly from the clutch pedal sub-assembly.
Pull the clutch release cable assembly through from the brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).
Remove the clutch release cable bush and washer plate.
Pull the clutch release cable assembly through to the engine room.
Release the clutch release cable assembly from the 3 clutch cable brackets.
Remove the clutch housing cover from the clutch housing.
Disconnect the clutch release cable assembly from the clutch release fork sub-assembly.
If necessary, loosen the adjusting nut in advance.
Pushing the clutch release fork sub-assembly toward the front of the vehicle will make it easier to remove the clutch release cable assembly.
Remove the 2 bolts and the clutch release cable assembly from the clutch housing.