33030
1.REMOVE MANUAL TRANSMISSION ASSEMBLY
31204
2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
Remove the clutch release fork sub-assembly together with the clutch release bearing assembly from the manual transmission assembly.
31230
3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY
Remove the clutch release bearing assembly from the clutch release fork sub-assembly.
31232A
4.REMOVE RELEASE BEARING HUB CLIP
Remove the release bearing hub clip from the clutch release fork sub-assembly.
Remove the release fork support spring from the clutch release fork sub-assembly.
31236B
5.REMOVE RELEASE FORK SUPPORT
Remove the release fork support from the manual transmission assembly.
31210
6.REMOVE CLUTCH COVER ASSEMBLY
| *a | Matchmarks |
Put the matchmarks on the clutch cover assembly and the flywheel sub-assembly.
Loosen each set bolt one turn at a time until the spring tension is released.
Remove the 6 bolts and clutch cover assembly.
Do not drop the clutch disc assembly.
31250
7.REMOVE CLUTCH DISC ASSEMBLY
Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel sub-assembly free from oil and foreign matter.