Home › Drivetrain › CLUTCH › CLUTCH UNIT(for K3-VE) › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0015097 CLUTCH UNIT(for K3-VE) A

CLUTCH  CLUTCH UNIT(for K3-VE)  REMOVAL  


PROCEDURE

Hide 33030 1.REMOVE MANUAL TRANSMISSION ASSEMBLY

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.

Remove the clutch release fork sub-assembly together with the clutch release bearing assembly from the manual transmission assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.

Remove the clutch release bearing assembly from the clutch release fork sub-assembly.


Hide 31232A 4.REMOVE RELEASE BEARING HUB CLIP

a.

Remove the release bearing hub clip from the clutch release fork sub-assembly.


b.

Remove the release fork support spring from the clutch release fork sub-assembly.


Hide 31236B 5.REMOVE RELEASE FORK SUPPORT

a.
C147001

Remove the release fork support from the manual transmission assembly.


Hide 31210 6.REMOVE CLUTCH COVER ASSEMBLY

C142538C04
1.427,1.844 1.24,1.938 1.24,1.938 1.448,1.75 true 1.063,1.917 1.271,2.094 0.208,0.177 10 *a
*a Matchmark


a.

Put the matchmarks on the clutch cover assembly and the flywheel sub-assembly.


b.

Loosen each set bolt one turn at a time until the spring tension is released.


c.

Remove the 6 bolts and clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 7.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel sub-assembly free from oil and foreign matter.