1.INSPECT MANUAL TRANSMISSION OIL
Park the vehicle on level ground.
Remove the filler plug and the gasket.
| *a | 0 to 5 mm (0 to 0.20 in.) |
Check that the surface of the manual transmission oil is within 5 mm (0.20 in.) below the lowest position of the inner surface of the filler plug opening with a finger.
An excessively large or small amount of manual transmission oil may cause problems.
After changing the manual transmission oil, drive the vehicle and check the transmission oil level.
Check for transmission oil leakage when the transmission oil level is low.
Install the filler plug and a new gasket.