Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM19Y0E _53 Suspension _002989 FRONT SUSPENSION _0015126 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

C127546
2.125,0.375 2.646,0.802 0.521,0.427 10 A

a.

Fully extend the front shock absorber piston rod, and fix it at an angle in a vise or similar tool.


b.

Using a drill or similar tool, slowly make a hole in the area (A) shown in the illustration to discharge the gas inside.

HINT:
·

The gas is colorless, odorless and harmless.

·

Since the discharging gas may cause chips to scatter, cover the drill with a piece of cloth when making the hole.