1.REMOVE FRONT WHEEL
48820
2.SEPARATE FRONT STABILIZER LINK ASSEMBLY
Remove the nut and separate the front stabilizer link assembly from the front shock absorber.
If the ball joint turns together with the nut, use a socket hexagon wrench 6 to hold the stud.
47313A
3.SEPARATE FRONT FLEXIBLE HOSE
Remove the bolt and separate the front flexible hose.
89543
4.SEPARATE FRONT SPEED SENSOR
Remove the bolt and separate the front speed sensor bracket.
Disconnect the front speed sensor wire harness clamp from the front shock absorber.
48684
5.REMOVE BEARING DUST COVER
6.REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING
If the front shock absorber needs to be disassembled, loosen the front support to front shock absorber nut.
Do not remove the nut.
Remove the 2 nuts and 2 bolts from the lower side of the front shock absorber with coil spring.
Keep the bolts from rotating and turn the nuts.
Remove the 3 nuts from the upper side of the front shock absorber with coil spring.
Remove the front shock absorber with coil spring.