48609A
1.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY
As shown in the illustration, secure the front shock absorber with coil spring in a vise between aluminum plates by clamping onto a double nutted bolt affixed to the bracket at the bottom of the shock absorber.
Using SST, compress the front coil spring.
Do not use an impact wrench. It will damage SST.
Remove the front support to front shock absorber nut and front suspension support sub-assembly.
2.REMOVE BUSH
48044
3.INSTALL FRONT NO. 1 SPRING SEAT SUB-ASSEMBLY
48157
4.REMOVE FRONT COIL SPRING UPPER INSULATOR
48132
5.REMOVE FRONT COIL SPRING
48331
6.REMOVE FRONT NO. 1 SPRING BUMPER