Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR
RM19Y0E _53 Suspension _002989 FRONT SUSPENSION _0015128 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48811 1.INSTALL FRONT STABILIZER BAR

a.

Install the front stabilizer bar with the paint mark on the front stabilizer bar facing down.


Hide 48815 2.INSTALL FRONT NO. 1 STABILIZER BAR BUSH

C145763
1.188,1.49 1.188,1.927 false 1.083,1.958 1.625,2.177 0.542,0.219 10 *1
*1 Bush Stopper
V100135

Outside


a.

Install the 2 front No.1 stabilizer bar bushes to the front stabilizer bar.

HINT:

Install the front No. 1 stabilizer bar bush with the bush as shown in the illustration.



Hide 48829A 3.INSTALL FRONT NO. 1 STABILIZER BRACKET LH

a.

Install the front No. 1 stabilizer bracket LH with the 3 bolts.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


Hide 48824A 4.INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT:

The installation procedure for the RH side is the same as that for the LH side.


Hide 48824 5.INSTALL FRONT STABILIZER BRACKET

a.

Install the front stabilizer bracket with the 2 bolts.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)

HINT:

The installation procedure for the RH side is the same as that for the LH side.



Hide 48820 6.INSTALL FRONT STABILIZER LINK ASSEMBLY

a.

Install the front stabilizer link assembly with 2 new nuts.

Torque:
74 N*m (755 kgf*cm, 55 ft.*lbf)

HINT:
·

If the ball joint turns together with the nut, use a socket hexagon wrench 6 to hold the stud.

·

The installation procedure for the RH side is the same as that for the LH side.




Hide 7.INSTALL FRONT WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)