Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR
RM19Y0E _53 Suspension _002989 FRONT SUSPENSION _0015128 FRONT STABILIZER BAR G

FRONT SUSPENSION  FRONT STABILIZER BAR  INSPECTION  


PROCEDURE

Hide 48820 1.INSPECT FRONT STABILIZER LINK ASSEMBLY

C066721

a.

As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.


b.

Using a torque wrench, turn the nut continuously and take the torque reading on the 3rd turn.

Turning torque:

0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17.3 in.*lbf)



c.

Check for any cracks and grease leakage on the ball joint dust cover.