1.REMOVE FRONT WHEEL
48820
2.REMOVE FRONT STABILIZER LINK ASSEMBLY
Remove the 2 nuts and front stabilizer link assembly.
If the ball joint turns together with the nut, use a socket hexagon wrench 6 to hold the stud.
The removal procedure for the RH side is the same as that for the LH side.
48824
3.REMOVE FRONT STABILIZER BRACKET
Remove the 2 bolts and the front stabilizer bracket.
The removal procedure for the RH side is the same as that for the LH side.
48829A
4.REMOVE FRONT NO. 1 STABILIZER BRACKET LH
Remove the 3 bolts and the front No. 1 stabilizer bracket LH.
48824A
5.REMOVE FRONT NO. 1 STABILIZER BRACKET RH
The removal procedure for the RH side is the same as that for the LH side.
48815
6.REMOVE FRONT NO. 1 STABILIZER BAR BUSH
Remove the 2 front No. 1 stabilizer bushes from the front stabilizer bar.
48811
7.REMOVE FRONT STABILIZER BAR
Remove the front stabilizer bar from the vehicle.