Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM19Y0E _53 Suspension _002990 REAR SUSPENSION _0015131 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER

C145768
1.75,0.229 2.125,0.635 0.375,0.406 10 A 2.75,0.229 3.115,0.552 0.365,0.323 10 B 2.271,1.49 2.802,1.906 0.531,0.417 10 *a
*a 25 mm (1.0 in.)


a.

Fully extend the rear shock absorber piston rod.


b.

Using a drill or similar tool, slowly make a hole in the area (A-B) shown in the illustration to discharge the gas inside.

NOTICE:
·

The gas is colorless, odorless and harmless.

·

Since the discharging gas may cause chips to scatter, cover the drill with a shop rag or piece of cloth when making the hole.