1.REMOVE REAR WHEEL
46430
2.SEPARATE PARKING BRAKE CABLE ASSEMBLY
Remove the bolt and separate the parking brake cable assembly from the rear lower arm.
48231B
3.REMOVE REAR COIL SPRING
Support the rear axle housing with a jack.
Support the rear lower arm with a jack. Insert a wooden block between the jack and the rear lower arm to prevent damage.
Loosen the bolt on the rear lower arm (front side).
Keep the nut from rotating and turn the bolt.
Do not remove the bolt and nut.
Remove the nut and bolt from the rear lower arm (rear side).
Keep the bolt from rotating and turn the nut.
While slowly lowering the jack on the rear lower arm side, remove the rear coil spring.
48481
4.REMOVE REAR UPPER SPRING SEAT
48482A
5.REMOVE REAR LOWER SPRING SEAT
48730
6.REMOVE REAR LOWER ARM
Remove the bolt and nut and remove the rear lower arm.