Home › Brake › BRAKE SYSTEM (OTHER) › K3-VE BRAKE PEDAL(for LHD) › 2011.11–2015.08
RM19Y0E _54 Brake _002993 BRAKE SYSTEM (OTHER) _0015149 K3-VE BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  K3-VE BRAKE PEDAL(for LHD)  REASSEMBLY  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad onto the brake pedal sub-assembly.


Hide 47131 2.INSTALL STOP LIGHT SWITCH CUSHION

a.

Install the cushion onto the brake pedal sub-assembly.


Hide 47101B 3.INSTALL BRAKE PEDAL BUSH

a.
C250937C01
3.177,2.104 3.344,2.104 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to 2 brake pedal bushes.


b.

Install the 2 bushes onto the brake pedal sub-assembly.


Hide 47101 4.INSTALL BRAKE PEDAL SUB-ASSEMBLY

a.
C250938C01
3.208,2.104 3.354,2.104 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the return spring and brake pedal shaft.


b.

Install the return spring onto the brake pedal sub-assembly.


c.

Install the brake pedal sub-assembly onto the pedal support with the brake pedal shaft and nut.

Torque:
19 N*m (195 kgf*cm, 14 ft.*lbf)


d.
C250936

Engage the return spring with the pedal support and brake pedal sub-assembly.