1.REMOVE FRONT WHEEL
2.DRAIN BRAKE FLUID
Immediately wash off any brake fluid that comes into contact with any painted surfaces.
47313A
3.SEPARATE FRONT FLEXIBLE HOSE
Remove the union bolt and gasket and separate the front flexible hose from the disc brake cylinder assembly.
47750
4.REMOVE DISC BRAKE CYLINDER ASSEMBLY
Remove the 2 bolts and remove the disc brake cylinder assembly.
04465
5.REMOVE FRONT DISC BRAKE PAD KIT
Remove the front disc brake pad kit from the front disc brake cylinder mounting.
04945
6.REMOVE FRONT ANTI SQUEAL SHIM KIT
Remove the front anti squeal shim from the disc brake pad (outer).
Remove the pad wear indicator plate from the brake pad (inner).
7.REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE
Remove the 2 front disc brake pad support plates from the front disc brake cylinder mounting.
47715A
8.REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN
Remove the 2 front disc brake cylinder slide pins from the front disc brake cylinder mounting.
9.REMOVE FRONT DISC BRAKE BUSH DUST BOOT
| *1 | Front Disc Brake Bush Dust Boot |
Remove the 2 front disc brake dust boots from the front disc brake cylinder mounting.
47722
10.REMOVE FRONT DISC BRAKE CYLINDER MOUNTING
Remove the 2 bolts and remove the front disc brake cylinder mounting from the steering knuckle.