1.REMOVE REAR WHEEL
2.DRAIN BRAKE FLUID
Immediately wash off any brake fluid that comes into contact with any painted surfaces.
47316A
3.REMOVE REAR BRAKE TUBE FLEXIBLE HOSE (w/o ABS)
Using union nut wrench, separate the brake tubes while holding the rear brake tube flexible hose with a wrench.
Do not kink or damage the brake line.
Do not allow any foreign matter such as dirt and dust to enter the brake line.
Remove the 2 clips and rear brake tube flexible hose.
47316A
4.REMOVE REAR BRAKE TUBE FLEXIBLE HOSE (w/ ABS)
Using union nut wrench, separate the brake tubes while holding the rear brake tube flexible hoses with a wrench.
Do not kink or damage the brake line.
Do not allow any foreign matter such as dirt and dust to enter the brake line.
Remove the 4 clips and rear brake tube flexible hoses.