Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM19Y0E _55 Steering _002997 POWER ASSIST SYSTEMS _0015160 POWER STEERING SYSTEM L

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  PRECAUTION  


HANDLING PRECAUTION


a.

When handling electronic parts:

·

Avoid any impact to parts such as ECUs and relays. Replace with new ones if dropped or subjected to a severe blow.

·

Do not expose to high temperatures or humidity.

·

Do not touch the connector terminals, in order to prevent deformation or malfunctions due to static electricity.



b.

When handling the steering column assembly:

·

Avoid any impact to the steering column assembly, especially to the motor and torque sensor. Replace with new ones if dropped or subjected to a severe blow.

·

Do not pull the wire harness when moving the steering column assembly.



c.

When disconnecting and reconnecting the connectors:

·

When disconnecting the connectors related to the electronic power steering system, turn the ignition switch to ON, center the steering wheel, turn the ignition switch off, and then disconnect the connectors.

·

When reconnecting the connectors related to the electronic power steering system, ensure that the ignition switch is off. Center the steering wheel and then turn the ignition switch to ON.

NOTICE:

Do not turn the ignition switch to ON when the steering wheel is not centered.