DESCRIPTION
The EPS (Electric Power Steering) system uses a motor and reduction mechanism built into the steering gear housing to generate assist torque for the driver's steering effort. The amount of assist torque is calculated by the power steering ECU assembly.
This system offers excellent fuel economy as the motor mounted on the steering column consumes energy only when power assist is required.
This system excels in serviceability because it does not require pipes, a vane pump, pulleys or power steering fluid.
FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Power Steering Torque Sensor | Torque sensor | Detects the steering effort generated when the steering wheel is turned. |
| Power steering motor | Activated by the current from the power steering ECU assembly and generates torque to assist the steering effort. | |
| Power Steering ECU | Calculates the degree of assist needed based on the steering torque and vehicle speed. | |
| Transmits idle-up signals to the ECM. | ||
| ECM | Transmits engine speed signals to the power steering ECU. | |
| Combination Meter | Illuminates the power steering warning light upon receiving a signal from the power steering ECU in the event of a system malfunction. | |
| Transmits speed sensor signals to the power steering ECU. | ||