Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM19Y0E _56 Audio / Visual / Telematics _003000 AUDIO / VIDEO _0015166 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) D

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  IDENTIFICATION OF NOISE SOURCE  


Radio Description


a.

Radio frequency band

i.

Radio broadcasts use the radio frequency bands shown in the table below.

E108734
0.677,0.281 1.625,0.51 0.948,0.229 10 Frequency 1.875,0.281 2.417,0.479 0.542,0.198 10 30 kHz 5.24,0.281 5.854,0.479 0.615,0.198 10 30 MHz 4.115,0.281 4.781,0.479 0.667,0.198 10 3 MHz 2.979,0.271 3.625,0.469 0.646,0.198 10 300 kHz 6.354,0.281 7.115,0.479 0.76,0.198 10 300 MHz 0.698,0.875 1.677,1.073 0.979,0.198 10 Designation 0.708,1.344 1.646,1.573 0.938,0.229 10 Radio Wave 0.719,1.823 1.656,2.052 0.938,0.229 10 Modulation 2.583,0.896 2.854,1.094 0.271,0.198 10 LF 3.677,0.885 3.948,1.083 0.271,0.198 10 MF 4.844,0.896 5.115,1.094 0.271,0.198 10 HF 5.885,0.885 6.271,1.083 0.385,0.198 10 VHF 3.531,1.344 3.802,1.542 0.271,0.198 10 AM 5.781,1.344 6.052,1.542 0.271,0.198 10 FM 5.552,1.833 7.052,2.031 1.5,0.198 10 Frequency Modulation 3.083,1.833 4.802,2.031 1.719,0.198 10 Amplitude Modulation 0.333,2.302 1.833,2.531 1.5,0.229 10 LF: Low Frequency 5.26,2.302 7,2.5 1.74,0.198 10 VHF: Very High Frequency 3.781,2.302 5.365,2.531 1.583,0.229 10 HF: High Frequency 1.958,2.302 3.927,2.531 1.969,0.229 10 MF: Medium Frequency



b.
E108735
0.875,1.823 1.063,2.021 0.188,0.198 10 *a 1.219,2.313 1.396,2.51 0.177,0.198 10 *b 1.656,2.823 1.833,3.021 0.177,0.198 10 *c
*a FM (Stereo)
*b FM (Monaural)
*c AM


Service area

i.

The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.



c.

Radio reception problems

HINT:

In addition to static, other problems such as "phasing", "multipath", and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


i.
I100011
2.396,0.417 2.792,0.74 false 0.104,0.052 0.323,0.271 0.219,0.219 10 *a 2.75,0.781 2.969,0.969 0.219,0.188 10 *b
*a Phasing
*b Ionosphere


Phasing

AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.


ii.
I100012
0.094,0.052 0.26,0.25 0.167,0.198 10 *a
*a Multipath


Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.


iii.
I100013
0.101,0.072 0.357,0.274 0.256,0.202 10 *a
*a Fade Out


Fade out

Fade out is caused by objects (buildings, mountains, and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to deflect.



d.

Noise problem

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

Radio Frequency Noise Occurrence Condition Presumable Cause
AM Noise occurs in a specified area Foreign noise
AM Noise occurs when listening to an intermittent broadcast An identical program transmitted from multiple towers can cause noise where the signals overlap
AM Noise occurs only at night Signal phasing
FM Noise occurs while driving in a specified area Multipath resulting from a change in FM frequency