86160
1.INSPECT FRONT DOOR SPEAKER ASSEMBLY
Do not touch the cone part of the front door speaker assembly.
Check the speaker installation.
The speaker is securely installed.
If the result is not as specified, reinstall the front door speaker assembly.
Check the speaker visual.
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front door speaker assembly.
| *a | Component without harness connected
(Front Door Speaker Assembly) |
Check the speaker resistance.
Remove the front door speaker assembly.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 3.4 to 4.6 Ω |
If the result is not as specified, replace the front door speaker assembly.