Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER
RM19Y0E _56 Audio / Visual / Telematics _003000 AUDIO / VIDEO _0015169 REAR DOOR SPEAKER G

AUDIO / VIDEO  REAR DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160N 1.INSPECT REAR DOOR SPEAKER ASSEMBLY

HINT:

Do not touch the cone part of the rear door speaker assembly.


a.

Check the speaker installation.

OK:

The speaker is securely installed.


If the result is not as specified, reinstall the rear door speaker assembly.


b.

Check the speaker visual.

OK:

The cone paper of the speaker is not torn.


If the result is not as specified, replace the rear door speaker assembly.


c.
B157649
2.656,0.177 3.083,0.646 0.427,0.469 10 *a
*a Component without harness connected
(Rear Door Speaker Assembly)


Check the speaker resistance.

i.

Remove the rear door speaker assembly.


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.4 to 4.6 Ω


If the result is not as specified, replace the rear door speaker assembly.