GENERAL
When the ultrasonic sensors detect any obstacles at the rear of the vehicle, the system informs the driver of the distance between the sensors and the obstacles by buzzer and indicator.
FUNCTION OF COMPONENTS
| Component | Function |
|---|---|
| Clearance warning ECU assembly | Receives signals from the ultrasonic sensors. Based on the received wave, the ECU calculates the approximate distance value between the vehicle and obstacle, and sounds the buzzer to inform the driver according to the distance to the obstacle. |
| No. 1 ultrasonic sensor | The ultrasonic sensor sends and receives ultrasonic waves. |
| Combination meter assembly | Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle. |
| Park/neutral position switch assembly*1
Back-up lamp switch assembly*2 |
Sends a signal that activates the TOYOTA parking assist-sensor system when the shift lever in R. |
*1: for Automatic Transmission
*2: for Manual Transmission
OPERATION EXPLANATION
The operating conditions of each ultrasonic sensor differ according to the installation position as shown in the table below.
| Installation Position | Operating Condition |
|---|---|
| Back sonar Sensor | ·
Ignition switch ON. ·
Shift lever in R. |