Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK
RM19Y0E _58 Vehicle Interior _003005 DOOR LOCK _0015182 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH

a.
B297832
1.146,3.365 1.406,3.635 true 2.479,4.25 2.135,4.042 true 2.156,3.656 2.531,3.354 true 1.771,2.969 2.146,3.344 0.375,0.375 10 *a 2.188,2.813 2.521,3.156 0.333,0.344 10 *b 0.167,2.896 0.625,3.354 0.458,0.458 10 *c 2.552,4.26 3.156,4.615 0.604,0.354 10 LOK+ 1.021,3.198 1.438,3.646 0.417,0.448 10 E 2.552,3.177 3.125,3.677 0.573,0.5 10 U/L+
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Assembly LH)


Check the resistance of the door lock and unlock switch. (for LHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (E) - 3 (LOK+) Locked Below 1 Ω
Unlocked 10 kΩ or higher
2 (E) - 1 (U/L+) Locked 10 kΩ or higher
Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



b.
B297832
1.49,4.323 1.646,4.063 true 2.063,4.323 1.906,4.063 true 1.771,2.979 2.25,3.396 0.479,0.417 10 *a 2.188,2.844 2.615,3.292 0.427,0.448 10 *b 0.167,2.896 0.635,3.333 0.469,0.438 10 *c 1.188,4.375 1.833,4.667 0.646,0.292 10 LOK+ 2.083,4.396 2.625,4.615 0.542,0.219 10 U/L+
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Assembly LH)


Check the operation of the front door lock motor. (for LHD)

i.

Apply battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 5 (LOK+)
Battery negative (-) → 4 (U/L+)
Locked
Battery positive (+) → 4 (U/L+)
Battery negative (-) → 5 (LOK+)
Unlocked


If the result is not as specified, replace the front door lock assembly LH.



c.
B290792
1.052,3.521 1.552,3.906 true 2.469,3.521 1.948,3.917 true 1.813,2.979 2.542,3.573 0.729,0.594 10 *a 2.229,2.802 2.958,3.292 0.729,0.49 10 *b 0.458,3.146 1.25,3.833 0.792,0.688 10 *c 0.583,3.375 1.458,3.958 0.875,0.583 10 LOK+ 2.469,3.375 3.198,4.094 0.729,0.719 10 U/L+
*a Lock
*b Unlock
*c Component without harness connected
(Front Door Lock Assembly LH)


Check the operation of the front door lock motor. (for RHD)

i.

Apply battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (LOK+)
Battery negative (-) → 1 (U/L+)
Locked
Battery positive (+) → 1 (U/L+)
Battery negative (-) → 2 (LOK+)
Unlocked


If the result is not as specified, replace the front door lock assembly LH.



Hide 2.INSPECT FRONT DOOR LOCK ASSEMBLY RH

a.
B297833
1.198,4.323 1.542,4.063 true 1.958,4.052 2.406,4.333 true 1.208,2.802 1.542,3.188 0.333,0.385 10 *a 1.594,2.979 1.948,3.344 0.354,0.365 10 *b 0.375,3.125 0.823,3.531 0.448,0.406 10 *c 0.75,4.26 1.49,4.656 0.74,0.396 10 LOK+ 2.5,4.25 3.188,4.573 0.688,0.323 10 U/L+
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock Assembly RH)


Check the operation of the front door lock motor. (for LHD)

i.

Apply battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (LOK+)
Battery negative (-) → 1 (U/L+)
Locked
Battery positive (+) → 1 (U/L+)
Battery negative (-) → 2 (LOK+)
Unlocked


If the result is not as specified, replace the front door lock assembly RH.



b.
B290791
1.646,4.052 1.438,4.375 true 1.927,4.042 2.135,4.365 true 1.146,2.792 1.49,3.167 0.344,0.375 10 *a 1.563,2.969 1.927,3.385 0.365,0.417 10 *b 0.563,3.167 1.042,3.583 0.479,0.417 10 *c 2.135,4.385 2.875,4.625 0.74,0.24 10 U/L+ 1.052,4.375 1.875,4.635 0.823,0.26 10 LOK+
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock Assembly RH)


Check the operation of the front door lock motor. (for RHD)

i.

Apply battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 5 (LOK+)
Battery negative (-) → 4 (U/L+)
Locked
Battery positive (+) → 4 (U/L+)
Battery negative (-) → 5 (LOK+)
Unlocked


If the result is not as specified, replace the front door lock assembly RH.



c.
B290791
1.406,3.646 1.083,3.49 true 2.146,3.656 2.583,3.49 true 1.427,4.063 1.021,4.198 true 1.135,2.792 1.521,3.198 0.385,0.406 10 *a 1.542,2.969 1.948,3.365 0.406,0.396 10 *b 0.292,3.104 0.854,3.583 0.563,0.479 10 *c 0.698,3.354 1.375,3.854 0.677,0.5 10 U/L+ 0.583,4.135 1.333,4.552 0.75,0.417 10 LOK+ 2.646,3.375 3.083,3.802 0.438,0.427 10 E
*a Unlock
*b Lock
*c Component without harness connected
(Front Door Lock Assembly RH)


Check the resistance of the door lock and unlock switch. (for RHD)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (E) - 6 (LOK+) Locked Below 1 Ω
Unlocked 10 kΩ or higher
1 (E) - 2 (U/L+) Locked 10 kΩ or higher
Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.