Home › Vehicle Interior › DOOR LOCK › REAR DOOR LOCK
RM19Y0E _58 Vehicle Interior _003005 DOOR LOCK _0015183 REAR DOOR LOCK G

DOOR LOCK  REAR DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69340 1.INSPECT REAR DOOR LOCK ASSEMBLY LH

B290796
1.229,3.573 1.583,3.906 true 2.302,3.573 1.917,3.938 true 1.688,2.99 2.323,3.552 0.635,0.563 10 *a 2.146,2.792 2.771,3.448 0.625,0.656 10 *b 0.521,3.24 1.26,4.021 0.74,0.781 10 *c 0.792,3.427 1.5,4.25 0.708,0.823 10 LOK+ 2.313,3.427 3.063,4.208 0.75,0.781 10 U/L+
*a Lock
*b Unlock
*c Component without harness connected
(Rear Door Lock Assembly LH)


a.

Check the operation of the rear door lock motor.

i.

Apply battery voltage and check the operation of the rear door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (LOK+)
Battery negative (-) → 1 (U/L+)
Locked
Battery positive (+) → 1 (U/L+)
Battery negative (-) → 2 (LOK+)
Unlocked


If the result is not as specified, replace the rear door lock assembly LH.



Hide 69330 2.INSPECT REAR DOOR LOCK ASSEMBLY RH

B290797
1.313,3.625 1.583,3.917 true 2.219,3.625 1.938,3.938 true 1.198,2.792 1.76,3.448 0.563,0.656 10 *a 1.604,2.979 2.219,3.615 0.615,0.635 10 *b 0.563,3.302 1.083,3.917 0.521,0.615 10 *c 0.875,3.479 1.677,4.094 0.802,0.615 10 LOK+ 2.229,3.479 2.969,4.083 0.74,0.604 10 U/L+
*a Unlock
*b Lock
*c Component without harness connected
(Rear Door Lock Assembly RH)


a.

Check the operation of the rear door lock motor.

i.

Apply battery voltage and check the operation of the rear door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (LOK+)
Battery negative (-) → 1 (U/L+)
Locked
Battery positive (+) → 1 (U/L+)
Battery negative (-) → 2 (LOK+)
Unlocked


If the result is not as specified, replace the rear door lock assembly RH.