WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION
The wireless door lock control system locks/unlocks the doors remotely. This system has the following features:
The door control receiver performs the code identification process and operates the door lock control.
A key ring type transmitter is used and contains the following 2 switches: the door lock switch and door unlock switch.
FUNCTION OF MAIN COMPONENTS
| Components | Functions |
|---|---|
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from the door control transmitter and changes the waves to code data. |
| Door control transmitter | ·
Contains the lock and unlock switches. ·
Transmits the weak electric waves (recognition codes and function codes) to the door control receiver. |
·
Front door courtesy light switch assembly LH ·
Front door courtesy light switch assembly RH ·
Rear door courtesy light switch assembly LH* ·
Rear door courtesy light switch assembly RH* ·
Back door lock assembly (back door courtesy switch) |
·
Located on each door. ·
Detects the door status (open or closed) and outputs data to the door control receiver via the combination meter assembly. ·
Turns on when the door is opened and turns off when the door is closed. |
·
Front door lock assembly LH ·
Front door lock assembly RH ·
Rear door lock assembly LH ·
Rear door lock assembly RH ·
Back door lock assembly |
Operates the motor in response to signals from the door control receiver and locks and unlocks the doors. |
*: w/ Rear Door Courtesy Switch
SYSTEM FUNCTION
The wireless door lock control system has the following functions:
| Function | Outline |
|---|---|
| All door lock function | Pressing the lock switch locks all the doors. |
| All door unlock function | Pressing the unlock switch unlocks all the doors. |
| Answer-back function | w/o Theft Warning ECU Assembly
·
When the doors are locked by a wireless operation, the hazard warning lights flash once. ·
When the doors are unlocked by a wireless operation, the hazard warning lights flash twice. w/ Theft Warning ECU Assembly
·
When the doors are locked by a wireless operation, the hazard warning lights flash once and security buzzer sounds once. ·
When the doors are unlocked by a wireless operation, the hazard warning lights flash twice and security buzzer sounds twice. |
| Automatic lock function | If no doors are opened within 30*1 or 40*2 seconds after they are unlocked by the door control transmitter, all the doors (including the back door) lock again automatically. |
| Illuminated entry function | ·
When the map light and No. 2 room light door switch is on and all the doors are locked, pressing the unlock switch causes the interior light to illumination turn on and driver side door to unlock simultaneously. ·
If the doors have not been opened, the map light assembly and No.2 room light assembly turns off in approximately 15 seconds. |
| Panic alarm function*2 | Pressing the lock switch of the door control transmitter for more than approximately 1.2 seconds causes the following alarms to activate:
·
Sounds the security buzzer. ·
Flashes the hazard warning lights. ·
Illuminate the map light assembly and No. 2 room light assembly. |
*1: w/o Theft Warning ECU Assembly
*2: w/ Theft Warning ECU Assembly