Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM
RM19Y0E _58 Vehicle Interior _003006 THEFT DETERRENT / KEYLESS ENTRY _0015192 ENGINE IMMOBILISER SYSTEM D

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  SYSTEM DESCRIPTION  


ENGINE IMMOBILISER SYSTEM DESCRIPTION


The engine immobiliser system is designed to prevent the vehicle from being stolen. This system uses a transponder key ECU assembly that stores the key codes of authorized ignition keys. If an attempt is made to start the engine using an unauthorized key, the ECU sends a signal to the ECM to prohibit fuel delivery and ignition, effectively disabling the engine.


FUNCTION OF MAIN COMPONENT


Component Outline
Transponder key coil (antenna coil) When the key is inserted into the ignition key cylinder, the antenna coil receives the key code. Then the coil amplifies the ID code and outputs it to the transponder key ECU assembly.
Steering column upper with switch bracket assembly (unlock warning switch) Detects whether the key is in the ignition key cylinder and outputs the results to the transponder key ECU assembly.
Combination meter assembly (security indicator light) Depending on the operation of the transponder key ECU assembly, the security indicator light turns off or starts blinking.
Transponder key ECU assembly Checks the ID code received from the transponder key coil and if the results match, an EFI operation permission signal is sent through the SFI communication.
ECM Through the SFI communication, the ECM receives the ID verification results from the transponder key ECU assembly. The ECM also verifies the ECUs. Then the judgment of whether or not to disable the engine is made.


SYSTEM FUNCTION


a.

When the transponder key ECU assembly detects that the unlock warning switch is on, the transponder key ECU assembly provides current to the antenna coil and produces a weak electric wave. A transponder chip in the key grip receives the electric wave. Upon receiving the electric wave, the transponder chip outputs a key ID code signal. The transponder key coil receives this signal, the signal is amplified by the transponder key coil and the signal is transmitted to the transponder key ECU assembly.


b.

The transponder key ECU assembly compares the key ID code with the vehicle ID code, which was previously registered in the transponder key ECU assembly, and communicates the results to the ECM. After the identification results show that the key ID code matches the vehicle ID code and the transponder key ECU assembly has confirmed their match: 1) the engine immobiliser system is canceled and the engine starting controls (fuel injection control and ignition control) enter standby mode; and 2) the transponder key ECU assembly transmits a security indicator light signal that communicates "indicator off" to the theft warning indicator light assembly and the security indicator light turns off.