DESCRIPTION
The ECM controls the vehicle immobiliser system functions. Immobiliser system data and the DTCs can be read through the vehicles DLC3.
In some cases, a malfunction may occur in the immobiliser system even though the security indicator light is not illuminated. When the system seems to be malfunctioning, use the intelligent tester or Techstream to check for malfunctions and perform repairs.
Techstream is the name for the diagnostic tester in North America, but other countries will be using the Intelligent tester.
CHECK THE DLC3
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
INSPECT BATTERY VOLTAGE
Inspect the battery voltage.
11 to 14 V
If the voltage is below 11 V, replace the battery before proceeding.